Delta-electronics DeviceNet Slave Communication Module DVPDT02-H2 Manual de usuario descargar pdf (Pagina 13)

DeviceNet Slave Communication Module DVPDT02-H2

DVP-PLC Application Manual

3. Set up the communication parameters, e.g. “COM Port”, “Address”, “Baud rate”, and so on, for the PC and

DVP-28SV in this dialog box.

Parameter Function Default

COM Port

COM port on the PC to be used to

communicate with DVP-SV

COM1

Address Communication address of DVP-SV 01

Baud rate

Communication speed between PC and

DVP-SV

9,600 bps

Data Bits 7

Parity Even Parity

Stop Bit

Communication protocol between PC and

DVP-SV

Mode

Communication mode between PC and

DVP-SV

ASCII Mode

4. Click on “OK” and return to the main page.

5. Select “Network" => “Online”, and the “Select Communication Channel” dialog box will appear.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Sin comentarios

Delta-electronics DeviceNet Slave Communication Module DVPDT02-H2 Manual de usuario Pagina 13