Delta-electronics Ethernet Communication Module IFD9507 Manual de usuario descargar pdf (Pagina 16)

Ethernet Communication Module IFD9507

DVP-PLC Application Manual

AL# Attribute Content Explanation Default Latched

1 R/W Alarm point 2 0 Yes

2 R/W Alarm point 3 0 Yes

Symbol “R” refer to read only; “R/W” refers to read and write.

AL#0: Alarm Point 1

Explanations:

You can designate one RX extension point as the alarm point by setting up the AL register in IFD9507. When

the alarm point is triggered, IFD9507 will execute its corresponding function. When b15 of AL0 is set as “1”,

the Gateway will execute the event immediately. When RX point is triggered, the Gateway will only execute

the triggered event once.

Device Function Setting Attribute Default Latched

b15

Enabling the

function

b15 = 1: Enabling

b15 = 0: Disabling

R/W 0 Yes

b4 ~ b14 Reserved

R/W 0 No

b2 ~ b3

Type of event

enabled when

RX alarm point

is triggered

b3 b2

Reserved 0 0

Trigger E-Mail 0 1

Reserved 1 0

Reserved 1 1

The setting will be invalid when

thealarm function is being executed.

R/W 0 Yes

b1 Reserved Reserved

AL#0

Condition for

triggering RX

b0 = 0: Triggered when RX input

point is low

b0 = 1: Triggered when RX input

point is high

R/W 0 Yes

AL#1: Alarm Output 2

Explanations:

The settings for AL#1 are the same as those in AL#0.

AL#2: Alarm Output 3

Explanations:

The settings for AL#2 are the same as those in AL#0.

4.4 In buffer registers (IN) in IFD9507

IN# Attribute Content Explanation Default Latched

0~255 R/W Data input buffer Ethernet/IP input data 0 No

Symbol “R” refers to read only; “R/W” refers to read and write.

Explanations:

The input data was sent to Ethernet.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 71 72

Comentarios a estos manuales

Sin comentarios

Delta-electronics Ethernet Communication Module IFD9507 Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Delta-electronics Ethernet Communication Module IFD9507