Delta-electronics Extension Digital I/O Module DOP-EXIO14RAE Manual de usuario descargar pdf (Pagina 39)

Chapter 3 Creating and Editing Programs|DOP-EXIO Series

3-18

Revision March, 2008, Doc. Name: 2007PDD23000014

Activate “Search/Replace” fuction to open “Search/Replace” dialog box and choose the

“Search Device” tab. Enter device name “Y0” in the field of “Search Device” and select

the “None” in the field of “Type”. Then, press the “Search” button and the system will

find the instructions “OUT Y0” and “INC K4Y0”.

However, if enter the device name “Y0” in the field of “Search Device” still, but change

the “None” to “Fun.” in the field of “Type”, only the instruction “INC K4Y0” will be found

when “Search” button is pressed.

 Replace Device

Use this command to replace the specified device name match the search criteria in the

program. For example, activate “Search/Replace” fuction and choose the “Replace

Device” tab. In “Replace Device” tab, enter the “X0” in the field of “Search Device” and

select the type of search device as “LD”. Then, enter the “M100” in the field of “Replace

Device” and select the type of replace device as “LD”. Next, type in “10” in the field of

“Device Number”. Finally, press the “Replace” button, and the instructions which match

the criteria will be changed to LD M100~M109.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 156 157

Sin comentarios

Delta-electronics Extension Digital I/O Module DOP-EXIO14RAE Manual de usuario Pagina 39