Becker-Antriebe GmbH35764 Sinn/Germanywww.becker-antriebe.comA80 - A280A80AE - A280AEAssembly and Operating Instructions Plug-in drivesImportant infor

10Assembly and Operating InstructionsS1F -Safety limit switchOPEN-yellowS2F -Safety limit switchCLOSE-yellowS3F -Safety limit switch HK/LKS4F

11Checking the running directionThe direction of drive rotation depends on how the three mains phases are connected to the control unit and has to be

12Assembly and Operating InstructionsSetting the door limit positions1. 2. 3. 4.Opening the limit switchIf necessary remove the screws on the yellow b

131. 2. 3. 4.5.6.CautionWhenassembling thedriveataheightoflessthan2.50m, theyellowboltsmustbesecuredwiththeenclosed screws. Closin

14Assembly and Operating InstructionsMaintenanceAttentionThe door system must be regularly checked by an expert to ensure that it is in

15Technical dataType UnitA80/29A80AE/29A100/22A100AE/22A130/29A130AE/29A140/20A140AE/20Drive torque T Nm 80 100 130 140Drive speed n rpm 29 22 29 20D

16Assembly and Operating Instructions

17

18Assembly and Operating Instructions

19

2Assembly and Operating InstructionsIntroductionWarrantyStructural modications and incorrect installation which are not in accordance with

2353 300 040 0f 01/11

3Safety instructionsThe following safety instructions and warnings are intended to avert hazards and to prevent property damage and personal injury. P

4Assembly and Operating InstructionsProduct overview and dimensionsAll dimensions in mm.Driveswithacrankhandle(HK) Driveswithalightchain(LK)

5InstallationCautionDuring installation of the drive, access to the danger zone must be blocked off. The drive has to be mounted on a vibration reduci

6Assembly and Operating InstructionsLightchain(LK)NoteDrives with a light chain (LK) can be installed horizontallyand, with an additional

7OperationNoteIn order to prevent repeated coupling and decoupling of the emergency manual operation mechanism, the chain is to be kept tense during o

8Assembly and Operating InstructionsDisconnectingclutch(AK)AttentionWhenusingdriveswithadisconnectingclutch(AK)onsec-tional doors with spri

93~230 V3~230 V3~400 V 3~230 VCautionBefore voltage switching, the drive must be safely disconnected from the mains.The drives can be operated on a