Delta-electronics DELTA DUP-B Manual de usuario Pagina 484

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 491
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 483
Appendix C Multi-Link Connection
This chapter describes the connecting methods used to connect multiple HMIs to one or mor
external controllers, i.e. PLCs.
The connecting method for multi-link connection is shown as the figure below. The Ethernet
and COM2 serial port of HMIs are used.
HMI 1
172.16.190.1
HMI 3
172.16.190.3
Ethe
rnet
COM2 / RS-485
HMI 2 reads the data of
PLC 1 via Ethernet
HMI 3 reads the data of
PLC 1 via Ethernet
Ethernet
PLC 1
HMI 2
172.16.19
0.2
In
the fi
gure above, three HMIs, HMI 1, HMI 2 and HMI 3 are connected via Ethernet.
Only HMI 1is connected to PLC 1 by using COM2 serial port through RS-485 communication.
HMI 2 and HMI 3 are not connected to any external controller. However, through 1:N connection,
HMI 2 and HMI 3 are able to access the registers of PLC 1 via Etherent.
Revision May, 2010 C-1
Vista de pagina 483

Comentarios a estos manuales

Sin comentarios