
07 - Comparison of CP2000 Parameters to VFD-F Parameter
7-12
VFD-F-Group02-Operation Method Parameters CP2000-Corresponding Parameters
Parameter Function Default Parameter Function
Default
Setting
Setting
02-13 Master Frequency Memory Setting 01
N/A
00: Do not remember the last known frequency
01: Remember the last known frequency
02-14 Source of Second Frequency Command 00 00-20 Source of AUTO Frequency Command
(AUTO)
0
00 Master Frequency Setting is controlled by the digital
keypad.
0 Digital keypad
01 Master frequency is controlled by an external terminal
via analog input. AVI: DC 0~+10V.
1 RS-485 serial communication
02 Master frequency is controlled by an external terminal
via analog input. ACI1: DC 4~ 20mA.
2 External Analog Input (Pr03-00
03 Master frequency is controlled by an external terminal
via analog input. ACI2: DC 4~ 20mA
3 External UP/DOWN Terminal
04 Master frequency is handled via RS485 serial
Communication. (RJ-11).
6: CANopen communication card
05 External Reference Master frequency via External
Reference.
8: Communication card (no CANopen card)
02-15 Source of Second Operation Command 00 00-21 Source pf AUTO Functioning Command
AUTO
0
00: Controlled by the digital keypad
0: Digital keypad
01: Controlled by the external terminals, keypad STOP
enabled.
1: External analog input (Pr.03-00)
02: Controlled by the external terminals, keypad STOP
disabled.
2: RS-485 serial communication
03: Controlled by the RS-485 communication interface,
keypad STOP enabled.
3: External UP/DOWN terminal
04: Controlled by the RS-485 communication interface,
keypad STOP
5: Communication card ( not included CANopen card)
02-16 Loss of ACI Signal 0.00
N/A
0.00-Highest operational frequency
Comentarios a estos manuales