Delta Electronics DNS SIP Series Manual de usuario descargar pdf (Pagina 19)



&KDSWHU  6\VWHP&RQ¿JXUDWLRQV



Conguring via Telnet

Step 1 Use a CAT5 network cable to connect the SNMP IPv6’s Network port to

the network.

Step 2 Connect the workstation (Windows or Linux) to the LAN that the SNMP

IPv6 is connected to.

Step 3 For Windows, launch DOS prompt mode (Start

Run

key in cmd

and press Enter). For Linux, launch Shell.

Step 4 Enter the following command: telnet InsightPower or telnet IP address

to initiate telnet connection with the SNMP IPv6.

Step 5 When connection is established, enter Administrator’s account and

password (default: admin/ password, case sensitive). The Main Menu will

appear on the screen. Please refer to 4-5 Conguring via Text Mode for

more information.

127(

1. The SNMP IPv6 terminates idle connections after 60 seconds.

2. Refer to Chapter 5: InsightPower SNMP IPv6 for UPS Web for complete

congurations.



Conguring through COM Port

If a network connection is not available at your location, you can still set up the

SNMP IPv6 via COM port connection. Please follow the instructions below:

127(

If you are running a non-Windows system, refer to your system’s user manual

for Telnet clients.

Step 1 Use the provided RJ45 to DB9 cable to connect the SNMP IPv6’s COM port

to the workstations’ COM port.

Step 2 Make sure the two DIP switches of the SNMP IPv6 are set to the OFF posi-

tion (Normal Mode).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Sin comentarios

Delta Electronics DNS SIP Series Manual de usuario Pagina 19