Delta Electronics DNS SIP Series Manual de usuario Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
&KDSWHU ,QWURGXFWLRQ
No. Item Description
LED
Indicators
When the SNMP IPv6 is initializing or upgrading rmware, the
two LED indicators ash simultaneously to show its status. Refer
to the following:
z
Rapid simultaneous ashing (every 50ms) : Initialization
or rmware upgrade in progress.
z
Slow simultaneous ashing (every 500ms) : Initialization
failed.
WARNING : Do NOT remove the SNMP IPv6 or dis-
connect the UPS’s input power during initialization
or rmware upgrade! This could result in data loss
or damage to the SNMP IPv6.
The green LED indicator shows the network connection status:
z
ON : Network connection established and the IPv4 address
is useable.
z
OFF : Not connected to a network.
z
Flashes slowly (every 500ms) : Faulty IP address.
The yellow LED indicator shows the linking status between the
SNMP IPv6 and the UPS:
z
Flashes rapidly (every 50ms): UPS linked.
z
Flashes slowly (every 500ms): UPS not linked.
Console
(COM)
Port
1. Connects to a workstation with the provided RJ45 to DB9
cable to congure the system.
2. Connects to an EnviroProbe (optional) to monitor its con-
nected environment monitoring devices.
Reset
Button
Resets the SNMP IPv6. This does not aect the operation of the
UPS.
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Comentarios a estos manuales

Sin comentarios