Delta Electronics Ethernet Communication Module DVPEN01-SL Manual de usuario descargar pdf (Pagina 44)

Ethernet Communication Module DVPEN01-SL

DVP-PLC Application Manual

6.7 Setting up Static ARP Table

Application Setting up static ARP table

Network

requirement

(1) MAC address of equipment 192.168.1.6 is 00:18:23:10:00:35

(2) MAC address of equipment 192.168.1.1 is 00:18:23:10:00:04

1. See 6.1 for the connection and how to set up the communication.

2. Open the setup page and switch to “Static ARP Table” page.

3. Check “Enable ARP Table” box. Enter “192.168.1.6” in No. 1 IP, and its corresponding MAC

address is “00:18:23:10:00:35”.

4. Enter “192.168.1.1” in No.2 IP, and its MAC address is “00:18:23:10:00:04”. Click on “OK” to

complete the setting. Only the equipment within the IP range can be connected.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 53 54

Sin comentarios

Delta Electronics Ethernet Communication Module DVPEN01-SL Manual de usuario Pagina 44