Delta Electronics TP08 Manual de usuario descargar pdf (Pagina 84)

1 TPEditor Operation

1-82

■ Change Device Type

Choose Tools(T) > Change Device Type(D) command from the menu bar. The following Device Address Map

Table tab will appear (Figure 1-150). The users can change the type and the devices of the connected

controller. For example, when changing the connected PLC to Siemens S7-200 Series, the corresponding

devices should also need to be changed.

Figure 1-150

■ User-Level/Password Setting

Choose Tools(T) > User-Level/Password Setting(U) command from the menu bar. The following Password

Setup tab will appear (Figure 1-151). The users can set the priority of user level and password settings. When

the user level is set, the system will protect the object by different levels of priority and passwords. The higher

user level has higher priority and it also means that users need to enter the password which mathes the user

level otherwise the users can not edit the object.

Figure 1-151

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 99 100

Sin comentarios

Delta Electronics TP08 Manual de usuario Pagina 84