1 TPEditor Operation
© DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
1-17
■ System Function Key Setting: The users can use this option to define the button type and function of the
function key. It is not necessary to set the function key in each page. But, once the function key is used in
the page, the function key will function according to the definition of button type and defined function. (If
the function settings of system conflict with the function settings set in each page, the function settings of
each page get high priority.)
■ System Alarm Buzzer Setting: The users can enter system alarm conditions in System Alarm Buzzer
Setting tab. When the system alarm conditions are satisfied, the buzzer inside of TP series will alarm. It is
not necessary to set the alarm conditions in each page. But, once the conditions set in the page are
satisfied, the buzzer inside of TP series will alarm. (If the system alarm conditions conflict with the alarm
conditions of each page, the alarm conditions of each page get high priority.)
■ System Alarm LED Setting: The users can enter system alarm conditions in System Alarm LED Setting tab.
When the system alarm conditions are satisfied, the alarm LED indicator of TP series will light. It is not
necessary to set the alarm conditions in each page. But, once the conditions set in the page are satisfied,
the alarm LED indicator of TP series will light. (If the system alarm conditions conflict with the alarm
conditions of each page, the alarm conditions of each page get high priority.)
■ System Clock Setting: Using this option can write the time, week and date of TP series into PLC.
■ System Power ON Macro Setting: After power on, when this option is used, TP series will send the
commands one time every designated time interval (500ms ~ 2,000ms) set in System Power ON Macro
Settings tab.
■ Global Macro Setting: When this option is used, Macro Editor tab will appear and allow the users to enter
and edit macro commands directly in TPEditor. Using this option can save the memory and time on editing
PLC programs. After all the settings are completed, the edited screen will function according to the
definition of the macro commands. This function is only available for TP05 and TP08 series.
■ Recipe Setting: The users can use button object to decide to read recipes or write recipes. Before setting
recipes,
must be selected otherwise Recipe function option can not be used. In Recipe Setting
tab, the users can decide the area for reading or writing recipes, the size and the group number of recipes.
This function is only available for TP05 and TP08 series.
Tools
The pull-down options of Tools function are described as follows (Figure 1-25):
Figure 1-25
(329 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales