Delta Electronics TP08 Manual de usuario descargar pdf (Pagina 98)

3 Examples

3-6

Step 8. Check the box next to Function Key and click . The drop-down list will appear and show F0 ~ F9, Up,

Down, Left and Right for selection. The users can set it freely to control the button object.

Step 9. The users can set User Level to protect the function of the button object.

Step 10. Button Text is used to add the text on the button. Usually, the font setting is 8x12 for clear display.

The users can also use Graph Input option to import the picture on the button.

Step 11. After complete all settings, click OK button to finish and the button will be used as it is configured.

Step 12. Click

or choose Compile(C) > Build All(A) to compile the editing program.

Step 13. Next, in the system main menu of TP04G, choose “1. D/L AP TP04G

PC”. Then, the words of

“WAIT COMM……” will display on the screen of TP04G.

Step 14. Back to TPEditor software program, click Communication(M) > Write to TP(W). The Confirm dialog

box will display, and then press Yes button for confirmation. The system will start to download the

program to TP04G.

Step 15. Then, modify PLC communication address according to the parameter settings of PLC.

Step 16. Connect TP04G and PLC by using RS-485 communication. The method is to connect the RS-485

positive terminals of two PLCs to the RS-485 positive terminal of TP04G, and connect the RS-485

negative terminals of two PLCs to the RS-485 negative terminal of TP04G. Then, choose “5. Execute”

in the system main menu of TP04G, the communication between TP04G and PLC can be established

and the editing program can be executed also.

1 2 ... 93 94 95 96 97 98 99 100

Sin comentarios

Delta Electronics TP08 Manual de usuario Pagina 98