Delta Electronics TP08 Manual de usuario descargar pdf (Pagina 82)

1 TPEditor Operation

1-80

1-6-9 Tools

■ Communication Settings

Choose Tools(T) > Communication Settings(C) command from the menu bar. The following Communication

Setting tab will appear (Figure 1-146). The users can set TP Station Address from 0 to 255, determine the PC

COM Port and the Baud Rate (transmission speed) from 4800 to 115200 bps in the Communication Setting tab.

Please note that the TP communication address set in TPEditor should be comply with the communication

address of the connected TP series. After completing the settings, press OK button to save the settings and

exit the Communication Setting tab.

Figure 1-146

■ TP Protocol Setting

Choose Tools(T) > TP Protocol Setting(H) command from the menu bar. The following TP Protocol Setting

tab will appear (Figure 1-147). The users can set the communication protocol settings between TP and

monitored equipment, including the protocol settings of RS-232 (COM1) and RS-485/RS-422 (COM2). (The

users can set TP protocol settings either here or in the system menu of TP series. Please note that if the users

choose to download TP protocol settings set in TPEditor to TP series, the original settings of the system menu

of TP series will be replaced.)

Figure 1-147

■ TP Object Communication Default Setting

Choose Tools(T) > TP Object Communication Default Setting(T) command from the menu bar. The

following TP Object Communication Default Setup tab will appear (Figure 1-148). The users can set the

communication port and PLC ID number of all objects for connected equipment.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 99 100

Sin comentarios

Delta Electronics TP08 Manual de usuario Pagina 82