Delta Electronics TP08 Manual de usuario descargar pdf (Pagina 49)

1 TPEditor Operation

1-47

Figure 1-85

Step 2. When Refer Device is set to Bit, TP will read the corresponding PLC contacts (ON or OFF) and display

the message text on the screen of TP series directly according to the corresponding value of the

Current State. Message Display object is used to display the text only and it could not display picture.

When Scroll Display function is enabled, the users can set the message text to move in the direction of

From Bottom to Top, From Top to Bottom, From Right to Left or From Left to Right continuously.

Step 3. When Refer Device is set to Value, TP will read the values of the corresponding PLC registers and

display the message text on the screen of TP series directly according to the corresponding value of

the Current State. Message Display object is used to display the text only and it could not display

picture. When Scroll Display function is enabled, the users can set the message text to move in the

direction of From Bottom to Top, From Top to Bottom, From Right to Left or From Left to Right

continuously.

Step 4. When the Refer Device is set to Value, the Display Sequence could be either “From Max to Min” or

“From Min to Max” (Figure 1-86).

Figure 1-86

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 99 100

Sin comentarios

Delta Electronics TP08 Manual de usuario Pagina 49