Delta Electronics VFD-L Series Especificaciones descargar pdf (Pagina 33)

VFD-M Series

5-7

Freq.

cceleration/Deceleration characteristics

(1), (2) Disabling S curve

(3), (4) Enabling S curve

Pr.15

Jog Accel / Decel Time

Factory Setting: 1.0 sec

Settings 0.1 to 600.0 sec or 0.01 to 600.0 sec Unit: 0.1 or 0.01 sec

 This parameter sets the acceleration or deceleration time for Jog operation.

Pr.16

Jog Frequency

Factory Setting: 6.00 Hz

Settings 0.00 to 400.0 Hz Unit: 0.1 Hz

 When the JOG function is activated, the AC drive will accelerate from Minimum Output

Frequency (Pr.08) to Jog Frequency (Pr.16). Drive must be in “stop” status for the

operator to activate the JOG function. Likewise, during Jog operation, other commands

cannot be accepted through the keypad but FORWARD, REVERSE and STOP. The

JOG function can be remotely activated when the Jog terminal is closed, and if the Jog

terminal opens, the AC drive will decelerate from Jog Frequency to zero. The accel /

decel time is entered as Jog Accel / Decel Time (Pr.15). Multi-function Input terminals

(M1-M5) can also be used to initiate the JOG operation if so programmed.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 133 134

Sin comentarios

Delta Electronics VFD-L Series Especificaciones Pagina 33