Delta Electronics VFD-L Series Especificaciones descargar pdf (Pagina 61)

VFD-M Series

5-35

Over-current during acceleration (OCA)

Over-current during deceleration (OCd)

Over-current during steady state operation (OCn)

Ground fault or fuse failure (GFF)

Low voltage (not record)

3 Phase Input Power Loss

CPU Failure (CF2)

External Base-Block (bb)

Overload 2 (oL2)

Auto Adjustable accel/decel failure (cFA)

Software protection code (codE)

Pr.76

Parameter Lock and Configuration

Factory Setting: 00

Settings 00

All parameters can be set/read

All parameters are read-only

02-08

Reserved

Resets all parameters to 50Hz factory defaults

Resets all parameters to 60Hz factory defaults

 This parameter allows the user to reset the drive to factory settings.

Pr.77

Time for Auto Reset the Restart Times after Fault

Factory Setting: 60.0

Settings 0.1 to 6000.0 sec Unit: 0.1 second

 If there is no fault in the period of this setting, it will reset the rest restart times that used

after fault to the setting of restart times.

Pr.78

PLC Operation Mode

Factory Setting: 00

Settings 00 Disable PLC operation

01 Execute one program cycle

02 Continuously execute program cycles

03 Execute one program cycle step by step (separated by “STOP”)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 133 134

Sin comentarios

Delta Electronics VFD-L Series Especificaciones Pagina 61