Delta Electronics Network Device VFD-S Especificaciones descargar pdf (Pagina 46)

VFD-S Series

5-19

 Function Explanations:

d 0 Not Used.

d 1 AC drive operational:

the output terminal will be activated when the drive is running.

d 2 Maximum Output Frequency Attained:

the output will be activated when the AC drive

attains Maximum Output Frequency.

d 3

Zero speed:

the output will be activated when Command Frequency is lower than the

Minimum Output Frequency.

d 4

Over-Torque Detection:

the output will be activated as long as the over-torque is

detected. Pr.6-04 determines the Over-Torque detection level.

d 5

Base-Block (B.B.) Indication:

the output will be activated when the output of the AC

drive is shut off by external Baseblock.

d 6

Low Voltage Indication:

the output will be activated when low voltage is detected.

d 7

AC Drive Operation Mode:

the output will be activated when the operation of the AC

drive is controlled by External Control Terminals.

d 8

Fault Indication:

the output will be activated when faults occur (oc, ov, oH, oL, oL1, EF,

cF3, HPF, ocA, ocd, ocn, GF).

d 9

Desired Frequency Attained:

the output will be activated when the desired frequency

(Pr.3-02)is attained.

d10

PLC Program Running:

the output will be activated when the PLC program is running.

d11

PLC Program Step Completed:

the output will be activated for 0.5 sec. when each

multi-step speed is attained.

d12

PLC Program completed:

the output will be activated for 0.5 sec. when the PLC

program cycle has completed.

d13

PLC Program Operation Paused:

the output will be activated when PLC operation is

paused.

d14

Terminal Count Value Attained:

counter reaches Terminal Count Value.

d15

Preliminary Count Value Attained:

counter reaches Preliminary Count Value.

d16

Ready State Indicator.

d17 FWD command indication: When AC drive receives the command of forward

running, it will output immediately no matter AC drive is in the state of run or stop.

d18 REV command indication: When AC drive receives the command of reverse

running, it will output immediately no matter AC drive is in the state of run or stop.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 142 143

Comentarios a estos manuales

Sin comentarios

Delta Electronics Network Device VFD-S Especificaciones Pagina 46

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Delta Electronics Network Device VFD-S