Delta Electronics AC Drive VFD-F Series Especificaciones descargar pdf (Pagina 62)

VFD-F Series

5-29

Example 1 (Pr.05-15 = 1):

Execute one cycle of the PLC program. Its relative parameter settings are:

Pr.05-00 to 05-14: 1

to 15

step speed (sets the frequency of each step speed)

Pr.04-00 to 04-07:

Multi-Function Input Terminals (set one multi-function terminal as 32 -

PLC auto-operation).

Pr.03-00 to 03-07:

Multi-Function Output Terminals (set a Multi-Function Terminal as

34-PLC running indication, 35-PLC step completed or 36-PLC program

completed).

Pr.05-16: Direction of operation for the 1

to 15

step speed.

Pr.05-17 to 05-31: Operation time setting of the 1

to 15

step speed.

Program operation

command

Program operation

indication

Step operation

indication

Program operation

fulfillment indication

Note: The above diagram shows one complete PLC cycle. To restart the cycle, turn the PLC program off

and on again.

Example 2 (Pr.05-15 = 2): Continuously executes program cycles:

The diagram above shows the PLC program stepping through each speed. Set Pr.05-15 to 2 continuously

executes the program. To stop the PLC program, one must either pause the program or turn it off. (Refer

to Pr.04-00 to 04-07 values 32 and 33).

Example 3 (Pr.05-15 = 3) Execute one cycle step by step:

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 189 190

Sin comentarios

Delta Electronics AC Drive VFD-F Series Especificaciones Pagina 62